Return

 

CITY OF PRINCETON, INDIANA
STANDARDS FOR THE DESIGN AND CONSTRUCTION
OF
SANITARY AND STORM SEWERS

 
   The City of Princeton is responsible for the installation of all sanitary and storm sewer facilities constructed within the corporation limits. All sanitary sewer collection facilities shall be designed and constructed in full accordance with these Standards, Indiana Department of Environmental Management (IDEM), and Ten States Standards for Sewage Works latest edition.

   The purpose of these Standards is to establish a minimum criteria for design and workmanship. The jurisdiction of the Standards includes the entire sanitary system and its appurtenances from the point of connection with the building plumbing to the final point of discharge at the treatment facility.

   It shall be the Developer's/Contractor's responsibility to comply with all requirements of the City or other authority having jurisdiction on work if such authority imposes greater requirements. Furthermore, the Developer shall be responsible for procuring all necessary permits and licenses, pay all charges and fees for acquiring and recording all easements, and giving all notices necessary and incidental to the work.

   Addenda and/or revisions to these Standards may be issued periodically and will be distributed and made available to the public and contractor at the City Hall and the Wastewater Treatment Facility. Users shall be responsible to keep apprised of any changes and revisions to these Standards.

   Any conflicts between these Standards and any other applicable Ordinance and State laws shall be superseded by such Ordinance or law. These Standards are approved and adopted by the City of Princeton, City Council.
 

 
 
You may view the entire ordinance in PDF format by clicking on the button below.
Please note you must have the Adobe Acrobat reader installed on your system to view the document
 

 

Section Description Page
 
Section

Description

Click Here To View

  
1  Introduction Click Here 1-1
2 Definitions and Terms Click Here 2-1
3 General Rules and Requirements Click Here 3-1
4 General Design Standards Click Here 4-1
5 General Design Standards Click Here 5-1
6 General Design Standards Click Here 6-1
7 Restoration of Surfaces Click Here 7-1
8 Restoration of Surfaces Click Here 8-1
9 Restoration of Surfaces Click Here 9-1
10 Restoration of Surfaces Click Here 10-1
 

Figures 

      
5-1 to 5-10 Manhole Details Click Here
6-1 to 6-4 Lift Station Details Click Here
7-1 to 7-7 Pipe Laying Details Click Here
8-1 to 8-4 Surface Replacement Details Click Here
Lift Station Check List Click Here

Appendix A Click Here

Information on this site is for generalized use only; you should check with the proper officials for changes and updates.

Return

Princeton IN, Sewer and Wastewater Treatment